Same-Day Emergency Attendance  ·  0800 054 1524  ·  WhatsApp Us  ·  London & Surrey

Damp · Mould · Leak — Battersea

Leak Detection, Trace & Access & Mould Treatment in Battersea

Our engineers investigate hidden leaks, damp and mould in Battersea’s Victorian terraces and new riverside apartments on a planned appointment, then write the insurance-ready report your claim needs — across SW11 and SW8.

Get a call back☎ 0800 054 1524

Fully insured & qualified  ·  Non-invasive methods first  ·  Written reports included  ·  London & Surrey

Areas we cover from Battersea: SW11 and SW8 — Battersea Park, the streets between the commons around Northcote Road, Clapham Junction, and the new riverside blocks at Nine Elms and Battersea Power Station.

Why Battersea homes get damp, mould and hidden leaks

Battersea is a mix of two very different building types. There are the Victorian terraces around Battersea Park, Clapham Junction and the “between the commons” streets near Northcote Road, and there are the new riverside apartment blocks at Nine Elms and Battersea Power Station in SW8. Each fails differently. In the period terraces we most often trace leaks behind bay windows, valley gutters and chimney breasts, and slow concealed pipe leaks under solid ground floors. In the new-build flats the problems are just as real — escape of water from a flat above, leaks in concealed pipework and manifolds, and condensation mould in tightly sealed, well-insulated apartments. Whichever it is, we book a planned leak detection visit and find the real source before anything is opened up.

Insurance-ready trace and access for SW11 and SW8

Much of our Battersea work is trace and access across both the period terraces and the new riverside blocks, often with an insurance claim attached. We locate the leak non-invasively using thermal imaging, acoustic listening and moisture mapping, open up only the exact spot that needs it, and hand you a clear written report with photos and readings — the evidence a loss adjuster or managing agent needs to progress a claim. Trace and access may be covered under buildings insurance, depending on the policy, and we provide the insurance-ready evidence to support it. We cover Clapham, Fulham, Chelsea and Battersea for leak detection, trace and access, mould investigation and damp/mould surveys across London and Surrey.

Leaks and condensation mould in new riverside flats

The new apartments at Nine Elms and Battersea Power Station are efficient and airtight, which brings its own issues — a leak in one flat quickly shows up in another, and poor ventilation can cause condensation mould. Our team carries out a thorough damp and mould survey, works out whether the moisture is a leak or condensation, documents it for the freeholder and managing agent, and plans the right mould treatment and ventilation fix.

What we do in Battersea

Every job starts with finding the real cause — not painting over the symptom.

Trace & access (insurance)

We find and expose the leak and document it for your escape-of-water claim.

Insurance-ready reports

Clear, evidenced reports written for insurers, solicitors and managing agents.

Mould treatment & investigation

We find the moisture source, treat the mould and tackle the cause so it is far less likely to return — with a written report.

Leak detection

Thermal imaging, acoustic and moisture tracing to pinpoint a hidden leak before any wall comes down.

Damp & mould surveys

A proper diagnosis — condensation, penetrating or rising damp — so you fix the right thing once.

Moisture mapping & thermal imaging

Calibrated readings and thermal surveys that show exactly where the moisture is — and where it isn’t.

CCTV drainage surveys

Camera surveys that find blockages, collapses and leaking joints that feed damp into a property.

Emergency call-outs

Genuine 24/7 attendance when water is coming through a ceiling or a pipe has burst.

Real investigations by our team

Genuine photographs from DML jobs across London & Surrey — not stock imagery.

Corroded pipe joint with verdigris — leak source confirmed
Corroded joint found without stripping the room
Corroded copper pipe on RSJ beam — confirmed leak source
Corroded pipe confirmed as a leak source
Exterior brickwork showing efflorescence and damp staining
Efflorescence recorded on a damp survey

How we investigate

Non-invasive first. We open up only when we know exactly where the problem is.

1

Visual inspection

A methodical room-by-room inspection of the affected areas, inside and out.

2

Moisture readings

Calibrated moisture meter readings across walls, floors and ceilings.

3

Thermal imaging

Infrared scanning, where suitable, to reveal hidden moisture and cold spots behind finishes.

4

Acoustic & tracer gas

Acoustic listening and tracer gas, where suitable, to pinpoint concealed pipe leaks.

5

Pressure testing

Pressure testing of heating and supply pipework where suitable.

6

Photos & written report

Photographs, readings and clear findings in a written report you can act on.

Insurance leaks & trace and access

Trace and access may be covered under buildings insurance, depending on the policy. We provide insurance-ready reports and evidence to support the claim. Our Battersea engineers give you the non-invasive trace, the photographs and readings, and a written report you can hand straight to your insurer or loss adjuster.

Insurance, landlords and tenants in Battersea

Reports prepared to support insurance, landlord, agent or housing matters. Trace and access may be covered under buildings insurance, depending on the policy — we provide the photographs, readings and written evidence to support the claim. For landlords and housing providers, our reports are suitable as supporting evidence for housing, landlord or compliance matters. Written workmanship terms apply where relevant.

Pricing: Non-invasive inspections from £150 where suitable; trace and access, pressure testing, invasive works and remedial works are quoted based on the job. We confirm the price before we attend.

Book a damp, mould or leak investigation in Battersea

Covering Battersea and the surrounding area. Call free, WhatsApp us, or request a call back and one of our team will get straight back to you.

Get a call back☎ 0800 054 1524

Fully Insured &
Qualified
Written Reports
Included
Same-Day Response
Available
Housing & Compliance
Evidence Reports
Written Workmanship
Terms

Get a call back about your Battersea property

Tell us what’s happening and one of our team will call you back. For emergencies call 0800 054 1524 any time.

Send Us a Message

Areas we cover around Battersea

Clapham · Chelsea · Fulham · Trace & Access · Insurance Leak Investigations · Damp Surveys

We also attend Battersea Park, Clapham Junction, Northcote Road, Nine Elms and Battersea Power Station.

Frequently asked questions — Battersea

Can you find a leak in a new-build riverside flat?

Yes. We use thermal imaging, acoustic listening and moisture mapping to pinpoint leaks in concealed pipework and manifolds on a planned visit, then open up only the precise spot rather than the whole apartment.

Do I need an emergency, or can I book a planned appointment?

You can book a planned appointment. Our Battersea work is thorough investigation and insurance-ready reporting, so we arrange a convenient time rather than rushing a call-out.

I have a leak from the flat above — can you trace it?

Yes. Escape of water between flats is common in both the SW11 mansion stock and the SW8 riverside blocks. We trace the source, establish whether it is demised or communal, and document it for the freeholder, managing agent and insurer.

Will my insurance pay for the work?

Trace and access may be covered under buildings insurance, depending on the policy. We provide insurance-ready reports and evidence to support the claim.

My mould keeps coming back — why?

Because mould is a symptom, not the cause. In airtight new flats it is often condensation from poor ventilation. We investigate and fix the cause first, then treat the mould.